8011 H14 Lacquered Aluminium Coil (flip off seal)

• Customization: Available
• Usage: Food Use, Pharmaceutical
• Type: Roll
• Model NO.: lacquered aluminium coil
• Temper: Half Hard
• Treatment: Coated
• Thickness: Thick Foil
• Surface State: Double light Aluminum Foil
• Rolling Characteristics: Rolling
• Shape: Round
• Transport Package: Wooden Boxes Packing
• Specification: 0.17-0.21mm
• Trademark: TXAL
• Origin: China
• HS Code: 7607
• Production Capacity: 10000ton /Year

Product Description

 

Lacquered/Varnished Aluminum Strip for Pharmaceutical Vial Seals

Details
Alloy: 8011, 3105  Temper: H14 and  h34 
Thickness: 0.18 to 0.23mm
Width: 30 to 800mm
Type: In coil
ID of the coil: 76mm, 152mm

Tensile strength: 125 to 155mPa
Yield strength: 134 to 150mPa
Elongation: 2.5 to 3%
Earring rate: 2% max
Coating type:
1. One side color coating and the other side clear/transparent protective lacquer/varnished
2. Both sides clear/transparent coating/varnished
Coating material: Food grade epoxy or polyester
Test of coating: Autoclavable, heat-resistance, steam resistance, MEK wiping resistance, grid test, etc
Main applications: Aluminum closures, pharmaceutical vial seals, flip off / tear off vial seals;

Packing: 50~100KGS/coil as your requirement, strong wooden cases, about 20~23 tons within 20' FCL

Delivery Time: 25~35days after order and deposit

Alloy	Temper	Specification (mm)
		Thickness	Width		Sheet Length
			Sheet	Strip
8011 3105	H14, H16,	0.16~0.23	500~1000	50~1500	500~1500
Remark:  surface can be treated by hot water or  dos  .

 
 Chemical Composition 

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others
									each	Total
8011	0.5~0.9	0.6~1	0.1	0.2	0.05	0.05	0.1	0.08	0.05	0.15
3105	0.6	0.7	0.3	0.3~0.8	0.2~0.8	0.2	0.4	0.1	0.05	0.15

    

Mechanical Property for Short cap
Alloy	Temper	Thickness (mm)	U.T.S (Mpa)	Elongation (%)
8011	H14	0.16~0.21	185~205	2% max
Mechanical Property for Long cap
Alloy	Temper	Thickness (mm)	U.T.S (Mpa)	Elongation (%)
8011	H14	0.16~0.21	125~155	2%

  

Tolerance
Thickness	Width	Length	Diagonal
±0.005mm	+0.5, -0mm	±0.5mm	≤1mm