8ton punch machine for flip off seal
one cavity
1.1 Components of the Machine
a. 8 tons precision power press, 380V (compatible with 440V);
b. Mould with single cavity for 13/15/20/32mm cap, made as per customer's cap drawing and samples;
c. Machine control system, including the ECU (Electronic Control Unit) and wires.
d. Uncoiler and material feeder;
e. Air generators and cap & ring blowing systems, including one mechanical air generator, air outlets and connection tubes;
f. Ring separator;
g. Mould protection system, including the separate ECU (Electronic Control Unit), sensor and connection wires;
j. Hand protection system, including two infrared sensors, mounting brackets and connection wires;
1.2 Capacity: 10000-12000 caps/hour;
1.3 Aluminium coil width: 26-35mm (depending on cap size)
1.4 Spare parts (no addition cost): 50% parts of the cavity.
1.5 Tools: Standard tools for repair and maintenance of the machine & mould.
1.6 Installation dimension: 1300*1200*1700mm;
1.7 Installation Notes: Only one wire with 380V & 3 Phase is needed for the machine; No need to fix the machine to the ground.
1.8 Punching Oil required: 10# industrial white oil.
Technical specifications:
Capacity |
10000-12000pcs per hour |
Opreator |
1 person |
Power |
1.5KW |
Voltage |
380V |
Equipped with mould |
1 cavity ( 13mm 15mm 20mm 24mm 16mm 28mm 32mm) |
Dimension |
1400x950x2300mm |
Warranty |
1 years for free components replacement |
Components of the Machine
a. 2.8 tons power press, 380V (compatible with 440V);
b. Mould with single cavity for 13/15/20/32mm cap, made as per customer's cap drawing and samples;
c. Machine control system, including the ECU (Electronic Control Unit) and wires.
d. Uncoiler and material feeder;
e. Air generators and cap & ring blowing systems, including one mechanical air generator, air outlets and connection tubes;
f. Ring separator;
g. Mould protection system, including the separate ECU (Electronic Control Unit), sensor and connection wires;
j. Hand protection system, including two infrared sensors, mounting brackets and connection wires;
1.2 Capacity: 16000-18000 caps/hour;
1.3 Aluminium coil width: 26-35mm (depending on cap size)
1.4 Spare parts (no addition cost): 50% parts of the cavity.
1.5 Tools: Standard tools for repair and maintenance of the machine & mould.
1.6 Installation dimension: 1300*1000*1700mm;
1.7 Installation Notes: Only one wire with 380V & 3 Phase is needed for the machine; No need to fix the machine to the ground.
1.8 Punching Oil required: 10# industrial white oil.